Custom Titanium Clad Copper Flat Bar Samples Approved by Customer

A recent custom sampling project for titanium clad copper flat bars has been successfully completed, with all samples passing the customer's quality inspection. The project covered two cross sectional sizes, 20*10 mm and 25*10 mm, with titanium layers measuring 0.75-1 mm per side.

The successful sample approval demonstrates our capability to manufacture titanium clad copper flat bars to specific dimensional and material requirements, providing the customer with a reliable basis for subsequent procurement.

Custom Sampling Requirements for Titanium Clad Copper Flat Bars

Before proceeding with a larger order, the overseas customer requested samples in multiple specifications to evaluate product quality and manufacturing consistency.

The main requirements included:

· Cross-sectional sizes: 20 * 10 mm and 25 * 10 mm

· Titanium layer thickness: 0.75 - 1 mm per side

· Dimensional accuracy: Compliance with specified width and thickness tolerances

· Flatness and straightness: Suitable for subsequent assembly and installation

· Surface condition: Clean titanium surfaces without visible defects

· Bonding integrity: Reliable bonding between titanium and copper layers

Producing titanium clad copper flat bars with relatively thin titanium layers requires careful control of material preparation, bonding, rolling, and finishing. Dimensional accuracy and interface quality are particularly important to ensure that the finished products meet the customer's specifications.

The samples were manufactured according to the customer's requirements and delivered within the agreed lead time for evaluation.

Customer Inspection Results: All Samples Passed

After receiving the samples, the customer's quality team conducted dimensional and visual inspections. The inspection feedback confirmed that all evaluated items met the specified requirements.

The main inspection results were as follows:

· Flatness: No unacceptable warping or distortion was reported.

· Dimensional Accuracy: The cross-sectional dimensions and straightness met the customer's drawing requirements.

· Surface Quality: No visible scratches or abnormal oxidation discoloration were identified on the titanium surfaces.

· Titanium Layer Thickness: The 0.75 mm titanium layer per side passed the customer's thickness inspection.

· Bonding Quality: The titanium-copper interface showed satisfactory bonding, with no visible signs of delamination.

These inspection results demonstrate our ability to meet the customer's requirements for thin layer titanium clad copper flat bars through controlled bonding, rolling, and finishing processes.

From Sample Approval to Subsequent Orders

Following the successful sample evaluation, the customer proceeded with orders for the corresponding flat bar specifications.

For industrial buyers, evaluating samples before bulk procurement is an important step in supplier qualification. It allows dimensional accuracy, surface condition, material configuration, and bonding quality to be checked before larger production commitments are made.

By supporting multi-specification sampling, we help customers verify product suitability and reduce potential quality risks during the procurement process.

Customized Titanium Clad Copper Flat Bar Solutions

Titanium clad copper flat bars combine the corrosion resistance of titanium with the electrical conductivity of copper. They are used in industrial applications such as electroplating, electrolysis, electrolytic equipment, and power transmission systems.

We manufacture customized titanium clad copper flat bars according to customer drawings and project requirements, with options for different widths, thicknesses, and titanium layer configurations.

Whether for initial sample evaluation or subsequent production orders, we support customized specifications and technical discussions to help customers identify suitable titanium clad copper solutions.

For product inquiries, technical specifications, or custom sampling requests, please contact our sales team or submit your drawings for evaluation.